Boot from USB flash drive

公司買o左五條 Toshiba U3 4GB flash Drive
諗住用o黎 boot 機+ clone ghost image
用 HP USB Disk Storage Format Tool format&sys 完
http://files.extremeoverclocking.com/file.php?f=197
再用Ghost 2003行
結果 1.3GB o既image 用o左我1.3hr!!!

結果係呢樹見到一大堆archive
http://radified.com/cgi-bin/YaBB/YaBB.cgi?board=general;action=display;num=1095438251;start=0
由04年9月去到07年2月....
爬o左兩日文後
最後決定用floppy boot 起USB 2.0 driver先再行ghost
6分鐘完工!!!

原文太長
節錄如下
USB driver for DOS:
1) Panasonic Universal USB Driver
http://panasonic.co.jp/pcc/products/drive/other/driver/f2h_usb.exe
open by winrar
only use "Usbaspi.sys"
2) aspi mass storage driver
http://radified.com/Files/usb-dos.zip
unzip it and unzip "MHAIRUDO.zip"
only use "di1000dd.sys"

Create Win98 Bootdisk
1) d/l from http://www.bootdisk.com
2) config.sys & autoexec.bat

[config.sys]

Device=himem.sys
rem :The following line loads Panasonic's universal USB-controller driver
rem :those are spaces between the file name and each of the switches
rem :The '/e' switch forces USB 2.0 only, remove for USB 1.x also
Device=usbaspi.sys /e /v
rem :The following is an aspi mass storage driver for usb-connected HDD's
rem :and compactflash memory cards
rem :The '/dE' switch USB drive letter to E
rem :The 'Motto Hairu USB Driver'
Device=di1000dd.sys /dE
Dos=high,umb
Lastdrive=z


[autoexec.bat]

rem :My USB HDD is drive 'l', if you wish, you will have to change this
rem :in your path statement to match your USB HDD drive letter
path=a:\;c:\;c:\pqmagic;l:\;l:\pqmagic

就是這麼簡單

ref:
http://radified.com/cgi-bin/yabb2/YaBB.pl